Filters +-
Category:
[X]Pumps

Pumps

Show Only Products with Qty. On Hand
Display per page
 

The product has been added to your Quote List

13000356
CONCENTRIC PUMP Description CONCENTRIC HI-LO PUMP
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 7 Days
2345B-LP
TRIPLEX PLUNGER PUMP Description 4.8 GPM, 2500 PSI, 1725 RPM MAX, 1/2 NPT INLET, 3/8 NPT OUTLET, 2435B WITH LEFT HAND SHAFT HYPRO
  • Qty.on Hand: 2
  • Non-Stock Lead Time: 35 Days
738-2144
ARGO HYTOS GEAR PUMP Description HYTOS GEAR PUMP, TYPE P23, 2.1 CC, HYTOS P/N 738-2144, INCLUDES (2) SHCS 8mm x 85mm LONG, MODEL CODE: P23-2.1L.66017
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 133 Days
9202C
HYPRO CENTRIFUGAL PUMP Description CAST IRON, PEDESTAL MOUNT; 105 GPM, 1-1/4" F-NPT INLET, 1" F-NPT OUTLET, 5/8" SOLID SHAFT, VITON
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 14 Days
F2020W-2E13V7T-12A61R
GEAR PUMP Description SAE B 2 BOLT MOUNT, 2 INCH SPLIT FLANGE SIDE INLET, 43 CC PER REV FRONT SECTION, 16 SAE O-RING SIDE OUTLET, 23CC PER REV REAR SECTION, 12 SAE O-RING REAR OUTLET, SAE B 13 TOOTH SPLINE SHAFT, CW ROTATION
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 140 Days
F3-F20W-2X19V1-1B12A10R
GEAR PUMP Description F20W-F20 SERIES, VITOB SEALS, SAE B 2 BOLT FLANGE, 24 SAE ORING SIDE INLET PORT 19-62CC PER REV, 16 SAE O-RING SIDE INLET PORT B-DOUBLE SHAFT SEAL, SAE B 13 TOOTH SPLINE SHAFT, SIDE PORTS, CW ROTATION
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 119 Days
GP1-P62RK310S
ARGO-HYTOS GEAR PUMP Description GEAR PUMP
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 133 Days
GP1-Q61RK7F0B
ARGO-HYTOS GEAR PUMP Description CLOCKWISE ROTATION, CYLINDRICAL KEYED SHAFT, SUCTION PORTS FLANGE FACE TO SAE J518, PRESSURE PORTS O-RING TO SAE J1926, 3.723 CINCH/REV.
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 133 Days
QXM22-008N350-66
PUMP Description 1.) Displ. = 8 cc/rev Internal Gear Pump, Frame size 1, Pressure range 2, Single gearset
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 98 Days
QXM32-010N350-66
PUMP Description 1.) Displ. = 10 cc/rev Internal Gear Pump, Frame size 2, Pressure range 2, Single gearset
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 98 Days
1003791
CONCENTRIC GCPB PUMP KIT Description CONCENTRIC GCPB PUMP KIT, INCLUDES GCPB PUMP AND 2390081 DRIVE COUPLING
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 119 Days
1210887
HALDEX DC PUMP MOTOR Description MOTOR: 12 VOLT DC 2 TERMINAL; SERIES WOUND; IP54 ENCLOSURE PUMP: GC SERIES FIXED CLEARANCE; 0.258CIR (4.22CC) CHECK VALVE; RELIEF VALVE SET TO 3000PSI FULL BY-PASS MOUNTING: 2X3/8-16 UNC-2B; 3.25" APART ON CENTER DUTY CYCLE: S2- 1 MINUTE AT 2500PSI; S2 REFERS TO RUN TIME.
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 119 Days
1300094
HALDEX PUMP Description PUMP, FLUID MOTOR, REP
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 10 Days
1300487
HYDRAULIC PUMP Description TWO STAGE HIGH/LOW 16 GPM, CW ROTATION, 1/2" SHAFT, 4 BOLT MOUNT, INLET PORT 1", OUTLET PORT 1/2" NPT
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 35 Days
1300634
CONCENTRIC FLOW DIVIDER, GC SERIES Description (F) FLOW DIVIDER, (G) GC SEIRES FLOW DIVIDER, (1) TWO SECTIONS (2) GEAR-.129 IN. 3/REV (2) GEAR- .129 IN. 3/REV, (00) NONE, (2) RELIEF VALVES ONE EACH SECTION, (1) SAE- PORTS
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 28 Days
181266D00
GC PRESSURE BALANCE PUMP Description GCPB SERIES PRESSURE BALANCED CAST IRON 0.0258CIR (4.22CC) CHECK VALVE RELIEF VALVE SET TO 3000PSI FULL BYPASS 3/4-16 SAE INLET 9/16-18 SAE OUTLET
  • Qty.on Hand: 3
  • Non-Stock Lead Time: 119 Days
9303C-HM4C-SP
HYPRO SELF PRIMING PUMP Description HYDRAULIC DRIVEN CENTRIFUGAL
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 14 Days
F30W-8X25W2-G1A10L
F30 SINGLE PUMP Description
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 119 Days
1300484
TWO STAGE HIGH/LOW HYDRAULIC GEAR PUMP Description 7 GPM NOMINAL FLOW, CW ROTATION. 1/2" SHAFT DIA., 1.5" SHAFT EXT., 4-BOLT MOUNT TYPE, 1/2" NPTF INLET, 1/2" NPTF OUTLET
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 42 Days
FP12A1B028L05KA103N
FP12 FERRA SERIES HEAVY DUTY GEAR PUMP Description
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 119 Days
1303219
WP900 SERIES Description 1303219, WP09A1B160R03FA102N, 0.976 CIR/16.0 CC, CW ROTATION, 7.45 GPM @ 1800 RPM & 1000 PSI, 14.91 GPM @ 3600 RPM & 1000 PSI, MAX. 4000 PSI, MAX. SPEED 3000 MIN. SPEED RPM, 500 RPM, 1-1/16-12 INLET, 7/8 -14 OUTLET, B STOCK CODE
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 42 Days
PU10008
GC SERIES HYDRAULIC PUMP Description GC- FIXED DISPLACEMENT PUMP 2- SAE "AA" 2 BOLT FLANGE 2.00" PILOT **- 1:8 TAPERED SHAFT M10 X 1.0 THREAD 12- 3.18 CC/REV (.194 CIR) DISPLACEMENT FIRST SECTION 36- 9.5 CC/REV (.581 CIR) DISPLACEMENT SECOND SECTION C- DIRECTIONAL CHECKS 5- BUNA SEAL WITH OUTBOARD BALL BEARING A- SIDE PORTS SAE -8 O-RING (3/4"-16) SIDE INLET PORT FIRST SECTION SAE -8 O-RING (3/4"-16) SIDE OUTLET PORT FIRST SECTION SAE -10 O-RING (7/8"-14) SIDE INLET PORT SECOND SECTION SAE -10 O-RING (7/8"-14) SIDE OUTLET PORT SECOND SECTION 3- BI-ROTATIONAL
  • Qty.on Hand: 0
  • Non-Stock Lead Time: 119 Days
Show Only Products with Qty. On Hand
Display per page